|
| Ekatalogprodukte & Wartet |
|
BUTT WELD STEEL TEE MOLDING PRESS
Kategori : Formenbau
|
Ф89 Equal Diameter Tee cold forming machine
The Main Technical Parameters of The Machine
1. Cylinders :
a.the upside cylinder(*1): diameter340mm , rod Ф280mm, stroke 400mm,
nominal pressure:28Mpa
b.the side-cylinder (*1): diameter 320mm , rod Ф260mm, stroke 200mm ,
nominal pressure:28Mpa
c.the ejection cylinder(*1): diameter 80mm with a stroke 200mm , nominal pressure:28Mpa
the thrust of the upside cylinder:250tons
the thrust of the side-cylinder:220tons, can make equal diameter tee with max 89*4mm
the thrust of the upside cylinder:14tons
2 pump station：63Scy-plunger pump :1 set, 30KW Motor: 1 set.16 gear pump 1 set (for the ejection cylinder). Water flooding pump 1 set. electric valves manipulations (PLC control, the motors start up directly),
3 main engine frame: welded of 30-35 mm medium steel sheet. The total weight about 4 T.
4. The scope of supply
a. The frame for the main engine: 1 parts(cylinder:4 pieces with 2 blocks of T shaped slide block)
Andere E Katalogprodukte & Wartet
|
E-Katalog Dienst ist nicht tätig !!
Dienst ist für GOLDENE Mitglieder nur !! !!
|
|
|
| Kontaktieren Sie Informationen |
|
Chengdong Developing Zone,East to Yanshantown,Cangzhou City,Hebei Province,China
061300
Cangzhou
/ China
Tel : +86-317-6193236
Fax : +86-317-6193226
|
Url :
http://www.flygjsb.com/English/
E-mail :
Kontaktieren Sie Person : Empon Shing Empon
/
|
|
Hydraulik - Pressen
Firma Startseite